How to set and correct the value of each parameter of automatic winding machine? What are the methods

With the rapid development of the winding machine industry, manual semi-automatic equipment is gradually eliminated, automatic winding machine as a fully intelligent machinery and equipment, many motor factories began to use, although the operation is relatively simple, are automated operation, but for the setting of parameters is still very important, what specific parameters involved?

1. Start winding position

The starting position of winding on the skeleton is related to the coil head and type.

2. Winding width

The winding width refers to the distance from the start winding point to the end point position, which is generally the length of the skeleton winding. In the process of setting, it is necessary to consider the influence of the slight deformation of the skeleton, and the small value can be taken as the winding width by comprehensive measurement.

3. Enameled wire specifications

Enameled wire has a variety of specifications, if not set properly will affect the effect of the winding line. Then the enameled wire material is not the same, the correction value is not the same, such as copper wire is relatively fine hard material, the correction value of 0.02 or so; like aluminum wire is relatively soft and easy to stretch, the general correction value of 0.02-0.2 between.

The above is the setting of some common parameters of the automatic winding machine, master these basic debugging methods and principles, in order to better use the winding machine, winding qualified coils!

WhatsApp/Wechat: +86 13075286997

Email: sales@vacuz.com [fusion_form form_post_id=”431″ margin_top=”” margin_right=”” margin_bottom=”” margin_left=”” hide_on_mobile=”small-visibility,medium-visibility,large-visibility” class=”” id=””][/fusion_form]