Automatic winding machine common functions and debugging methods

Automatic winding machine common functions and debugging methods, today Vacuz machinery and equipment to introduce it to you!

The winding machine not only has precise mechanical parts, but also equipped with a strong electrical control system. It combines electrical control, sensing technology, mechanical transmission, pneumatic devices and other components in one. Compared with other electrical processing equipment, the debugging method is more complex and fine. In the automatic winding equipment processing industry, the author has accumulated many years of debugging methods for winding equipment. This article will briefly introduce the commissioning of this type of equipment, in order to provide help for the majority of winding equipment users. The following debugging methods can be applied to the common winding process of tube coils. Mainly introduced winding position, enameled wire specifications and winding width of the three important winding parameters.1, how to set the winding positionWhat is the winding position? In short, it is the starting point of the winding spool. This position is closely related to the coil head and coil type. A specific value relative to the starting position can usually be measured by the measurement function of the equipment control system. The operator can also use the fixed point as a reference point, the actual measurement with a ruler for manual measurement, set the point with attention to the winding direction of the coil. 2, ordinary enameled wire set different wire diameter enameled wire specifications, enameled wire specifications are set correctly, will directly affect the effect of the cable, the use of different materials of enameled wire need to use different wire diameter correction, copper wire is not easy to increase the amount of correction of about 0.02 The aluminum wire after the equipment winding, through the tension of the equipment so that the line is easy to stretch, the correction value is greater than 0.02-0.2. winding width is understood as the distance from the beginning of winding to the end of winding. Usually, this value directly reflects the need for skeleton winding. It is necessary to consider the effect of slight deformation of the used skeleton on the winding width.

WhatsApp/Wechat：+86 13075286997

電子郵件: sales@vacuz.com [fusion_form form_post_id=”431″ margin_top=”” margin_right=”” margin_bottom=”” margin_left=”” hide_on_mobile=”small-visibility,medium-visibility,large-visibility” class=”” id=””][/fusion_form]