How important is it to do a good job of post-maintenance of the internal motor stator coil winding machine?

Inside the winding machine for long-term use, about its maintenance methods are, divided into which steps?

1, make good use of the adjustable components.

Such as winding tension, screen voltage, adjustable components such as the starting position of the line frame adjustment, in the maintenance is an easy and simple but effective way. Through the adjustment of adjustable components, correct some harmless failure. Such as in an enterprise repair a winding machine used for many years, the system display screen obscure, by adjusting the screen power supply voltage normal.

2, spare parts replacement method.

Automatic winding machine manufacturers in the maintenance of the winding machine, with intact spare parts to replace the suspected failure of the components, the maintenance staff basic judgment of the cause of the failure, the use of this method of rapid diagnosis of the scope of the fault, and the winding machine quickly into normal operation, and then the bad parts back to repair, this is a common approach to troubleshooting.

3, improve the quality of the environment method.

For some very strange faults, with the exclusion of replacement method can not find the cause, often need to start from the surrounding environment, the environment is generally divided into two kinds, power supply and space. Power supply to improve the use of regulated isolated power supply to improve the fluctuations from the power supply, for some high-frequency interference from the power supply can be used capacitive filtering method, through these preventive measures to reduce the failure caused by the power supply, increase and check whether the grounding is good is also very necessary. There are many causes of space interference, dust, gas, etc., the foundation of the virtual floating, vibration, etc., space radiation interference, etc., to name a few, need automatic winding machine manufacturers experienced maintenance technicians and professional equipment to detect and maintain.

4, the whole machine reset method.

General conditions of the automatic winding machine manufacturers of winding machine due to transient failure caused by the whole machine error, available hardware reset or switch system power supply in turn to clear the fault, if the system works storage area due to voltage instability, unplugged circuit board or rectifier switch power supply undervoltage caused by confusion, the system must be initialized and cleared, clear before the current data backup records should be noted, if the reset after initialization fault still can not be If the fault can not be eliminated after the reset initialization, the hardware replacement diagnosis.

5、Prepare trial run procedures.

Preparation of a reasonable program and run successfully is the basis for determining the integrity of the entire system function or not, some winding parameters set wrong may cause system failure or a function is invalid, sometimes due to user program errors caused by the failure of downtime, which can be used to prepare a trial run program to check, correct the user program errors to ensure its normal operation.

WhatsApp/Wechat：+86 13075286997

電子郵件: sales@vacuz.com [fusion_form form_post_id=”431″ margin_top=”” margin_right=”” margin_bottom=”” margin_left=”” hide_on_mobile=”small-visibility,medium-visibility,large-visibility” class=”” id=””][/fusion_form]