How to improve the productivity of automatic motor rotor production line? How to do the maintenance work

With the development of technology, the production of motor rotors has now been done using automatic rotor production lines. Compared to manual and traditional semi-automatic production lines, it can be said to have been upgraded to a great level, as the new era of automatic motor rotor production lines, not only high production efficiency, but also better quality of the products produced. However, as an automated machine, maintenance is important, not only for regular analysis and testing, but also for subsequent cleaning, lubrication and other maintenance work.

So how to improve the productivity of the automatic motor rotor production line? What maintenance work needs to be done!

1. Detect the current load of the motor rotor automatic line

Motor automatic load current can detect the rotor of the assembly line or detect the three-phase current balance. If the two-phase current value does not exceed the rated current value, the unbalanced current can not exceed 10%. Relatively large differences may be the presence of reverse phenomena such as short circuits and open circuits, or the presence of a single-phase operating condition of the motor. If this happens, stop the operation of the equipment immediately, confirm the cause and solve the problem.

2. Increase the supply voltage frequency of the motor rotor automatic line

During overspeed operation, the power supply voltage can be increased by increasing the frequency equipment or testing the auxiliary rotor automatic line to increase the operation speed. In addition, please use the power supply voltage frequency conversion device of the step-up assembly line. Improve operation by reducing the increase in current or armature voltage. If the increased voltage is lower than the rated voltage, the current will reduce the speed of the smooth cooling circuit.

These are the methods to improve the efficiency of the automatic production line of motor rotor, improve efficiency at the same time must also do a good job of maintenance, regular maintenance of equipment to ensure the smooth operation of the single machine and the entire assembly line, good cleaning and lubrication work.

WhatsApp/Wechat：+86 13075286997

電子郵件: sales@vacuz.com [fusion_form form_post_id=”431″ margin_top=”” margin_right=”” margin_bottom=”” margin_left=”” hide_on_mobile=”small-visibility,medium-visibility,large-visibility” class=”” id=””][/fusion_form]