电机定子线圈绕组错位的原因是什么？

The stator winding machine is composed of winding host, automatic lineup device, layer insulation supply device, adjustable winding frame, parallel winding, stacking winding function, pneumatic system, PLC control and servo system. It has the advantages of high degree of automation, complete functions and strong power. After a few years, the winding machine is more likely to have some problems. The following winding machine manufacturers HengYanCheng for some common problems to you: the following.

1, the line is not neat. We have to analyze the situation is a problem in the normal processing, or change the product debugged after the problem. The former generally belongs to the hardware problem. The latter is generally a setting problem. Hardware problems are generally loose fixtures, line mechanism fastening screws loose, line mechanism lubrication is poor resulting in excessive load stepper motor stepper motor out of step caused by the line is not neat.

2, the spindle parking position is not accurate. Spindle parking position is not accurate is generally caused by brake failure. For example, the brake pad is loose, or the brake pad is worn out. Also related to the brake time setting, the brake time is too short will also appear spindle parking position is not accurate. The brake pads need to be replaced or. Make brake time adjustment.

3, winding coil count is not allowed, winding machine, such as the count is not allowed, generally due to the sensor, or the controller hardware problems, the winding machine can not work in this case, is generally notified to the manufacturer for repair solutions.

WhatsApp/Wechat：+86 13075286997

电子邮件: sales@vacuz.com [fusion_form form_post_id=”431″ margin_top=”” margin_right=”” margin_bottom=”” margin_left=”” hide_on_mobile=”small-visibility,medium-visibility,large-visibility” class=”” id=””][/fusion_form].