So that the automatic winding machine can all normal operation, the daily operation process as far as possible in strict accordance with the technical standards of correct use, in the operation of the whole process to focus on supervision and maintenance work, but also pay attention to timely inspection of the automatic winding machine, do a good job of winding machine maintenance work. The purpose of doing so is on the one hand to better and better solve certain problems and avoid the trustworthy operation caused by the common problems of automatic winding machine. When it comes to how long the specific repair work needs to be maintained, it is also important to make sure to follow the methods of the automatic winding machine as well as to make use of the geographical environment to manage the decision.
Automated winders.
In the maintenance and repair work of the automatic winding machine, the main elements are as follows.
Clean and wipe the winding machine.
Immediately remove dust, oil, etc. from the outside of the winding machine. If the surrounding environment is dusty, it can be cleaned once a day.
Second check and clear the winding machine connection terminal block.
Check whether there is any loose and burned nails in the terminal block.
Inspection of the winding machinery and equipment on each fixed unchanging nail.
Necessary is the vertical standoffs, rolling bearing end caps nails and roller bearing cover nails, if found loose standoffs, should be tightened immediately.
Fourth, test the transmission device of the winding machine.
Check the transmission belt disk and coupling of the automatic winding machine to see if there are broken or damaged places, whether the installation is solid, the belt and its connection buckle is intact.
Automatic winding machine start mechanical equipment inspection work.

Automatico 16 mandrino trasformatore bobina avvolgimento macchina-1

Should immediately clear the automatic winding machine start mechanical equipment, clean the isolation switch, and check whether each alignment part of the equipment has burned scratches, and whether the wiring head is a quality product.
Sixth, winding machine roller bearing machinery and equipment for regular maintenance.
After using a certain period of time, the roller bearing machinery and equipment should be cleaned up immediately, dismantle grease or lubricant. To a particularly long time for a cleanup as well as oil change operation process also depends on the operation of the automatic winding machine, as well as the working environment, cleanup operation procedures and the determination of the type of lubricant. Under all normal conditions, automatic winding machines must be cleaned and oiled once after 1 to 2 seasons of use. If the temperature is high, or the surrounding environment is poor, dusty, must often be cleaned and oil change.
Seven, check the condition of the automatic winding machine cable casing.
The dryness of the automatic winding machine winding process has a negative impact on the winding capacity of the winding raw materials, therefore, it is very important to keep the motor winding always dry. It is entirely possible to damage the electrical cable sheath raw material if the working environment of the automatic winding machine is humid or if there is the presence of leaching acetylene gas. Causing more common problems is the difficulty of winding resistance grounding system, that is, there is damage to the cable sheath, resulting in the collision of some induction start parts with the shell and other metal composite materials that would not be able to inductively start electricity. This common problem will not only affect the normal operation of the automatic winding machine, but also a serious threat to personal safety. Therefore, in the case of using automatic winding machine, you need to check the ground resistance frequently and keep an eye on whether the automatic winding machine shell grounding system is reliable.
After one year of operation, the automatic winding machine must be overhauled.
The purpose of the automatic winding machine overhaul is to better be able to better thorough inspection and maintenance, the automatic winding machine missing, worn electronic devices immediately replaced. The automatic winding machine inside and outside the dust and waste to thoroughly clean up, check the equipment cable sheath condition, clear the roller bearing prefabricated components, and the wear and tear of each prefabricated components to check, found the problem immediately. If the automatic winding machine in the use of the whole process there is no irregular operation, usually also in the appropriate repair and maintenance, found the problem immediately, the service life of the automatic winding machine is still relatively long.

WhatsApp/Wechat: +86 13075286997

Email: sales@vacuz.com