Some friends bought a motor stator precision winding machine, in the process of using, found that the line is not aligned, it is very distressing, how to adjust are useless, then the motor stator precision winding machine line is not aligned how to do? How about the common causes and solutions? The following Vacuz give you an introduction to it!

Máquina automática de enrolamento de garfo voador de bobina de estator de motor externo sem escova BLDC para venda

In fact, the motor stator precision winding machine rows are not aligned, but also a common problem, usually due to equipment configuration, stability, debugging operation and spare parts accuracy and other aspects of the problem. The following are some common causes and solutions.

1. Equipment parts configuration, servo motor electric drive, screws, guide rails, cylinders, wire nozzles, etc. do not meet the requirements to meet the configuration requirements. Need to replace the more precise parts to ensure that the quality is qualified.

2. Machine stability problems: the machine base, frame stability is not good, the material and process does not meet the requirements, resulting in winding jitter shake, affecting the accuracy of the line. Need to replace the better combination of materials to ensure that the base is stable, equipment running at high speed, not shaking shake.

3. Tension adjustment problem: tensioner setting range is wrong, not in accordance with the requirements of the setting, tension is too tight or too loose, resulting in rows of wire is not neat or even broken wire injury. Need to adjust the tensioner to the right, to ensure that the tension balance.

4. Commissioning and controller operation problems: the technical level of the commissioning staff is not up to standard or lack of experience, the commissioning staff need to be trained to ensure that they have sufficient skills and experience.

5. Precision of stator core, skeleton and mold: Insufficient precision leads to wire lining problem, processing precision can be improved.

6. Winding speed: the machine runs too fast, resulting in uneven rows of wires. According to the size of the wire diameter, you can adjust the appropriate winding speed, to ensure that the output at the same time to ensure that the winding line precision.

Vacuz High Precision Inner Outer BLDC Brushless Drone Stator Motor Coil Needle Fly Fork Winding Machine

What should I do if the motor stator precision winding machine is not aligned? Vacuz above has made a simple explanation, I hope this little knowledge can help you!

E-mail: sales@vacuz.com