Six-axis stranding machine in order to adapt to the coil processing process winding machine need to configure the spindle speed control function, winding equipment should be processed type of difference in its configuration also varies, we are more familiar with the type of spindle motor AC motor, DC motor, servo-driven motor these three categories, these motors used in the speed control mode have their own characteristics, the following winding equipment combined with the speed control mode in the equipment

A, AC motor speed control: this type of motor itself is no speed control function, it needs to be electromagnetic speed control device or add a frequency converter to achieve speed control function, in the winding equipment we are more common is the frequency converter speed control mode, through the control system of the winding equipment control frequency converter to make the motor with speed control function, the way also has a certain role in energy saving.

Second, the DC motor speed regulation: DC motors need to supply power into DC power to drive the motor operation, so DC motors are configured with DC speed control board or brushless driver to drive the control motor, due to the small size of the motor in the small winding equipment applications are larger.

6-шпиндельный станок для намотки трансформаторов-2

Third, the servo-driven motor speed control: it belongs to the precision moving parts for high precision winding equipment, with a special driver to achieve closed-loop operation control, the biggest feature of this type of motor is constant torque, closed-loop operation, used to meet the requirements of high-precision coil processing.

After the purchase of the wrapping machine, we need to accept the new equipment for testing, so how should the acceptance of the winding equipment, there is no very clear standards for reference, many users tend to judge according to their own experience, so that the details of the equipment often can not be found, in general, should be based on the following steps for testing.

First of all, visual inspection and measurement, in the process of unpacking the equipment assembly can observe the appearance of the equipment and various configurations are complete, in the assembly process to check the contact and smoothness of the sliding parts, the use of testing tools for the coaxiality of various shafts and bores for the measurement, check the lubrication of the relevant action parts, should be smooth, reliable, no blocking phenomenon.

The second step of the test is idling operation, running under no load for about 30 minutes, check the bearing parts, sliding parts should be no obvious temperature rise, test the high and low speed of the equipment during the idling operation and whether the execution of various actions is good, test the accuracy of the position when stopping across the slot, and test whether the brake is effective, and whether the tensioner and the wire crossing wheel in the wire crossing device are smooth and smooth.

Provisions.

Ring wrapping machine needs to run with wire after idling operation, and the process of wire wrapping should test whether the number of coils wound is counted accurately, whether the movement of the wire lining device is smooth and correct, and whether the winding is flat and compact against the set process visually, and whether the insulation layer of the enameled wire is good.

WhatsApp/Wechat: +86 13075286997

Электронная почта: sales@vacuz.com