Six-axis stranding machine in order to adapt to the coil processing process winding machine need to configure the spindle speed control function, winding equipment should be processed type of difference in its configuration also varies, we are more familiar with the type of spindle motor AC motor, DC motor, servo-driven motor these three categories, these motors used in the speed control mode have their own characteristics, the following winding equipment combined with the speed control mode in the equipment
A, contrôle de la vitesse du moteur CA : ce type de moteur n'a pas de fonction de contrôle de la vitesse, il doit être équipé d'un dispositif de contrôle de la vitesse électromagnétique ou ajouter un convertisseur de fréquence pour obtenir une fonction de contrôle de la vitesse, dans l'équipement de bobinage, le mode de contrôle de la vitesse du convertisseur de fréquence est plus courant, grâce au système de contrôle de l'équipement de bobinage qui contrôle le convertisseur de fréquence pour doter le moteur d'une fonction de contrôle de la vitesse, cette méthode joue également un certain rôle dans les économies d'énergie.
Deuxièmement, la régulation de la vitesse du moteur à courant continu : Les moteurs à courant continu doivent être alimentés en courant continu pour faire fonctionner le moteur. Les moteurs à courant continu sont donc configurés avec une carte de contrôle de la vitesse du courant continu ou un pilote sans balais pour piloter le moteur de contrôle, en raison de la petite taille du moteur dans les petites applications d'équipement de bobinage.
Third, the servo-driven motor speed control: it belongs to the precision moving parts for high precision winding equipment, with a special driver to achieve closed-loop operation control, the biggest feature of this type of motor is constant torque, closed-loop operation, used to meet the requirements of high-precision coil processing.
After the purchase of the wrapping machine, we need to accept the new equipment for testing, so how should the acceptance of the winding equipment, there is no very clear standards for reference, many users tend to judge according to their own experience, so that the details of the equipment often can not be found, in general, should be based on the following steps for testing.
First of all, visual inspection and measurement, in the process of unpacking the equipment assembly can observe the appearance of the equipment and various configurations are complete, in the assembly process to check the contact and smoothness of the sliding parts, the use of testing tools for the coaxiality of various shafts and bores for the measurement, check the lubrication of the relevant action parts, should be smooth, reliable, no blocking phenomenon.
The second step of the test is idling operation, running under no load for about 30 minutes, check the bearing parts, sliding parts should be no obvious temperature rise, test the high and low speed of the equipment during the idling operation and whether the execution of various actions is good, test the accuracy of the position when stopping across the slot, and test whether the brake is effective, and whether the tensioner and the wire crossing wheel in the wire crossing device are smooth and smooth.
Provisions.
Ring wrapping machine needs to run with wire after idling operation, and the process of wire wrapping should test whether the number of coils wound is counted accurately, whether the movement of the wire lining device is smooth and correct, and whether the winding is flat and compact against the set process visually, and whether the insulation layer of the enameled wire is good.
WhatsApp/Wechat : +86 13075286997
Email : sales@vacuz.com [fusion_form form_post_id=”431″ margin_top=”” margin_right=”” margin_bottom=”” margin_left=”” hide_on_mobile=”small-visibility,medium-visibility,large-visibility” class=”” id=””][/fusion_form]