Winding machine due to the different winding coils of its components configuration are not different, many winding machine with thimble device its structure and principle and lathe thimble device is the same, in practice there are many customers do not play the role of the thimble device, and even the unauthorized removal of this part, these practices are wrong, will affect the quality of equipment winding, the situation is serious will accelerate the wear and tear of equipment caused by equipment damage. Thimble device in the winding machine equipment to maintain the concentricity of the spindle and winding mandrel and bear the load force from the radial direction, reduce the load on the spindle, reduce the radial runout during the operation of the equipment, so that the spindle run more smoothly and smoothly.

In the automatic winding machine ejector device is an essential component, it directly affects the equipment line effect, the ejector device can maintain the relative concentricity between the winding mandrel and the spindle while reducing the radial jump to obtain the best line effect, automatic winding machine ejector device is generally divided into two manual type and pneumatic type, the manual type requires the operator to move the moving rod to achieve the ejector action, pneumatic ejector requires an external The manual type requires the operator to move the moving lever to achieve the ejector action, the pneumatic ejector requires an external air source as power, the device is equipped with a spacing adjustment function, the use of different lengths of mandrel need to adjust the spacing, the manual ejector adjustment by moving the fixed position to achieve the distance between the ejector and the winding spindle, the pneumatic ejector adjustment not only needs to adjust the fixed position also needs to adjust the cylinder up and down distance and speed, the ejector device adjustment too tight will make the mandrel bend, increasing the load of the spindle motor, too loose will cause The device can not function, should be adjusted according to the length of the mandrel for the appropriate adjustment.

The role of the ejector device in the transformer winding machine is mainly to bear the radial load of the spindle, transformer winding machine winding coils are generally heavy, so the ejector device is more robust than the automatic winding machine, the ejector is generally divided into two types of manual and electric type, the structure and principle of the manual type ejector is basically the same as the large lathe ejector, through the rotation of the rocking disk to drive the position of the ejector to move, the electric type ejector is through the slow speed The motor drives the movement between the gear and the rack to realize the position movement of the ejector device, the spacing adjustment of the manual type ejector is based on the standard that the rocking disk can not rotate, and the electric type ejector is based on the standard of the top force, and the spacing adjustment can be moved by force to check whether the spacing is reasonable.

Hot Sale Fully Automatic High Frequency Transformer Bobbin Coil Inductor Winding And Soldering Machine Production Line

As one of the important parts of the thimble device of the winding machine, it is related to the effect of winding and the safety of the equipment, so the operator must pay attention to the adjustment and reasonable use of the thimble device.

Vacuz produces and sells automatic winding machine, precision winding machine, inductor winding machine and other equipment, welcome to consult and order.

WhatsApp/Wechat: +86 13075286997

Email: sales@vacuz.com